★Description★
Mud agitator is a supporting equipment in a solids control system. It is introduced to stir the drilling fluid and suspend solids so as to prevent solids sedimentation and keep drilling mud uniformity. It can also be used as the tool to mix drilling fluid in the mixing tank.
Mud agitator can be vertical mounted or horizontal mounted. It is composed of four parts, motor, gear box, shaft and impeller. The motor, coupled to a gear box, drives the shaft to rotate and transfer the mechanical power into fluid circulation by the impellers.
The mud agitator impeller can be one layer or two depending on the mud tank depth, as well as the shaft length. If the tank depth is more then 1800mm, a bottom stabilizer will be fixed onto the tank floor for shaft fixing to prevent the impact of violent swing on the device.
The impeller can be flat blade, canted blade or contour blade. It can be welded to the shaft or bolted to it.
In oil & gas drilling, the mud agitator motor and other electrical parts shall be explosion-proof. It is usually co-working with mud guns.
★SOEA Mud Agitator Characteristics★
◇ WNJ series of mud tank agitator can be facilitated with worm reducer or helical gear reducer, to meet different drilling mud properties and working conditions.
◇ SOEA mud agitator adopts the direct coupling connection. It is compact structure, simple installation, less and easy maintenance.
◇ SOEA mud agitator is with large strength, wide sweeping range, and starting resistance small.
◇ Different speed selection to meet different working request.
★SOEA Mud Agitator Types and Technical Parameters★
Type |
WNJ5.5 |
WNJ7.5 |
WNJ11 |
WNJ15 |
WNJ18.5 |
WNJ22 |
Motor Power (KW) - 4 Grade |
5.5 |
7.5 |
11 |
15 |
18.5 |
22 |
Impeller Speed (rpm)50Hz |
72 |
72 |
73 |
73 |
73 |
73 |
60Hz |
69 |
70 |
70 |
70 |
70 |
|
Impeller Diameter (mm) |
650 (single) |
700/650 (double) |
800/700 (double) |
850/750 (double) |
1000/900 (double) |
1000/900 (double) |
Reduction ratio |
1:25 |
|||||
Weight (kg) (not including shaft) |
280 |
380 |
450 |
570 |
740 |
780 |
External dimension (mm) (not including shaft) |
900×600×500mm |
950×620×540 |
1300×700×600 |
1380×800×700 |
1520×900×760 |
1450×900×800 |
★Production Flow★
Step I: Fabricating the parts and assembly together for function test.
Step 2: Surface Treatment
Step 3: Assembly and Packing
As the shaft is too long, we usually packed it separately. And the impeller and the base assembly with motor and gearbox are packed in one box.
★Packing and Delivery★
◇ Fumigation wooden box
◇ Non-fumigation wooden box
◇ Steel box
◇ Steel frame packing
For RFQ, please contact E-mail or whatsapp: +86 13609200456. 24 hours online.
http://www.soea-sep.com/